Adjustable Coring Template

Sku#: PLACT - ESL

Availability: 993 Units In-Stock

Your Price: $106.74   

  

Item Information

The Evening Star® Adjustable Coring Template makes precision core drilling your pavers or slabs a breeze! Our Heavy-Duty template is made from Nylon and has two adjustable aluminum rails. The template has a 2 1/2" diameter hole and is designed to work with all Evening Star® approved core bits. The template guides the core bit with high precision and makes the whole drilling process effortless.

Begin by marking the desired location of your PL250, PL250LED or PL300LED Paver Light on the paver.

Next, place the template on top and adjust the rails / knobs to center the hole over your mark. Tighten the knobs and you're all set.

Place the Core Bit in the hole and begin to drill. The Template will guide the core bit perfectly and not chip the paver! After a few moments, you can remove the template and continue to drill all the way through the paver.

Core Drilling is a Wet Process! We highly recommend using water while core drilling and any of our Water Swivels that are available as an accessory.

To drill slabs, or any large surface, simply remove the rails by removing the knobs. Place the template flat on the slab and hold it in place with your feet. Begin the core drilling until the bit penetrates and then it can be removed to finish the process.

For best results, we recommend core drilling over level surface. It is best to prop up your paver or slab on a pallet, or two parallel pieces of wood. This will allow the core bit to drill completely through the paver or slab and not have the core get lodged in the core bit. This can happen when drilling on the ground or flat solid surface. The core can be removed from the bit, but requires the bit to be removed from the drill and core pushed out using a screwdiver.

See our videos on Youtube on Core Drilling Pavers!


No Additional Specifications are Displayed at this Time.